Our submersible solids handling HS pumps have steep curves and can handle solids up to 60%

The HS is a hard wearing and versatile submersible solids handling pump featuring steep curves, advanced double mechanical seal design, high Chrome wet end parts, H-class windings; capable of handling Class 1, 2 and some Class 3 slurries and capacities up to 3000 US GPM.

Tandem double mechanical seals

Extended Run-Dry motor

Two Wet End designs available to suit your application needs

High Chrome wear components

H Class Motor submersible motor up to 100 HP

HS & HT Success Stories

a reliable and long-lasting pumping solution for a food producer’s wastewater management needs

A large American food producer faced persistent maintenance issues with their wastewater pumping system; these ongoing problems were a significant concern for the company. Upon switching to our HS pumps, they ensured uninterrupted operations and significantly reduced their maintenance requirements.

Designed to succeed in an sulphuric acid EDP application where others have failed

A large zinc producer had a problem with an EDP sump; the content was not only acidic but also full of solids; their pumps couldn’t handle the content of the sump and turned to us to get a duplex stainless CD4MU with a Brinell of +350 pump which has been in operation for almost 2 years with minimal downtime.

Providing an economical solution for a sand plant without sacrificing efficiency

A large plant in the South East of the United States needed to pump sand and gravel on a budget; after careful consideration and looking at what was available on the market, they set in on our HT pumps as they offered many features found in premium offerings at a competitive price and are outperforming lower cost options.

With the HS Series, it’s all in the seal!

When we designed the HS pump we made sure we engineered the perfect seal to accompany it.

HS Series seals are individually protected and in tandem configuration. This means each set of springs are protected from the slurry and provides equal and real backup in the event a lower seal is compromised. Next, we made some industry-leading advancements in the seal chamber itself. We incorporated anti-vortex oil veins, which ensure the seal remains clean and lubricated without the internal eddies and vortexes created by oil lifters. Then, we boosted the pressure venting in the seal chamber to allow for greater submergence as well as less internal pressure on the seal itself.

  • PERFECTLY ENGINEERED SEAL

    Individually protected and configured in a tandem arrangement that ensures equal backup and protection in case one seal is compromised.

  • ADVANCED SEAL CHAMBER DESIGN

    Industry-leading advancements in the seal chamber prevent the formation of eddies and vortexes, ensuring a clean and lubricated seal without the interference of internal flow disturbances.

  • EXTENDED RUN-DRY PUMPING

    Makes it suitable for applications where intermittent dry running may occur.

  • CLASS H INSULATION AND BUILT-IN THERMAL PROTECTION

    Provides enhanced protection against heat and safeguards the motor from excessive temperature and prevents potential damage.

We’ve designed and pre-configured control panels so you can protect and get the most out our pumping solutions

Our HPD Series of direct on line start control panels are designed to ensure optimal use of your pumps which results in reducing the maintenance and total cost of ownership.

Our HPS Series soft start control panels allow for more frequent pump starts by offering a less harsh starting sequence that reduces in-rush currents which is safer and gentler on the motor and creates less heat build-up and reduces the chance of damage due to water hammer and cavitation effect during startup.

Our HPD and HPS Series control panels come pre-configured to provide the peace of mind that comes from knowing it was engineered to the highest safety standards.

THE MODULAR ADVANTAGES

  • Maximum Flexibility

    If your pump performance requirements change, simply change the pumping end to ensure you are always achieving maximum productivity and efficiency.

  • Cost Savings

    No need to buy a brand new piece of equipment when system requirements change. Just change the pump end. If you can standardize on the same pumping ends throughout your plant then you can greatly reduce the need for excessive spare parts inventory.

  • Increased Productivity

    Production is profit. When systems change the lead times of some custom drive units can not only be long but also expensive. If you can recycle your drive unit and simply change your pumping end you can get back into production quicker, cheaper, with less downtime required.

S Wet End

SEMI-OPEN IMPELLER

  • Special elliptical cut water design

  • High efficiency curved back vanes

  • Up to 60% solids by weight

  • Available in High Chrome, CD4, Alloy 20, & more

E Wet End

RECESSED VORTEX IMPELLER

  • Patented axial spiral casing

  • No front wear plate needed

  • Available in ductile iron, High Chrome, CD4, Alloy 20, & more

  • Up to 40% solids by weight

  • Low shear

We have several repair and service facilities and a network of authorized repair locations across Canada, the USA, and Latin America

Malfunctioning pumps can cause significant downtime and lost productivity, which is why we strive to provide fast and reliable repair services to get your equipment back up and running as soon as possible. We use our large test tank to troubleshoot and test every pump we repair before it leaves our facility, ensuring that it operates at peak performance.

Our team is standing by to have your pump repaired as quickly as possible. That’s why we solely focus on repairing pumps so we can have them back up and running in the smallest time possible.

We use our large test tank to troubleshoot and test every pump we repair before it leaves our facility, ensuring that it operates at peak performance.

The HT Twins series is everything you hoped for in an economical yet rugged slurry pump design

Our economical and rugged slurry HT pumps are run dry capable and can handle up to 40% solids.

Anti-Clog Run-Dry design

Balanced radial forces for longer bearing & seal life

Increased wall thickness to withstand abuse

High Chrome wear components

Double mechanical seal with SiC faces

  • ANTI-CLOG RUN-DRY DESIGN

    Features an anti-clog run-dry design, ensuring efficient operation even in challenging conditions by minimizing the risk of clogging and allowing the pump to continue running smoothly.

  • BALANCED RADIAL FORCES

    Provides enhanced stability and extends the life of the seals and bearings. This feature is especially beneficial in unpredictable conditions.

  • LARGE INTERNAL PASSAGES

    Allows for the easy passage of solids, minimizing the risk of blockages and maintaining optimal pumping efficiency.

  • DOUBLE MECHANICAL SEAL WITH SIC FACES

    Provides superior protection against leaks and enhances the pump’s reliability, particularly in challenging slurry applications.

CONNECT WITH A SLURRY PUMPING SPECIALIST!

We are dedicated to providing the best pumping solutions for all of your needs. Connect with one of our pumping specialists who can assist you in selecting the right slurry pump for your application. Our pumps are built with durability in mind, designed to withstand harsh environments, and provide the highest efficiency day after day. So, whether you need a submersible, vertical, or horizontal slurry pump, we’ve got you covered.

Don’t let a pumping issue disrupt your operations; if you have an immediate pumping need or require repair services, we at Hevvy/Toyo Pumps are here to help. We will work with you to assess your needs and provide the best solutions to meet them.

© Hevvy/Toyo Pumps North America 1979-2023 - Privacy Policy | Terms & Conditions Of Sale | Terms & Conditions Of Purchase | 1550 Brigantine Drive, Coquitlam, BC V3K 7C1