Application Data Sheet for Requesting a Slurry Pump Quote

Name of Project:

Location:

Name of Client:

Average size of solids (D50):

DETAILS OF SLURRY

Description of the Slurry:

Average size of solids (D50):

microns

Maximum solids size to be pumped:

Unit

inches

Is the Specific Gravity of the slurry is known?

Yes

Specific Gravity of the slurry:

unitless

Specific Gravity of the solids: (sand = 2.65)

unitless

Specific Gravity of carrier fluid: (1 for water)

unitless

Concentration of solids by weight (Cw):

percentage

Temperature of the slurry / Operating temperature:

Unit

Celsius

Farenheit

Fluid Viscosity (Water = 1cP):

cP (leave blank if water)

pH Level:

Chlorides:

ppm

FLOW

Required Flow (Q)

Unit

m3/hr

gpm

If piping details are being provided Toyo can recommend optimal flow. Indicate if Toyo is to recommend flow (fill out details below):

TOTAL DYNAMIC HEAD

If Total Dynamic Head has been calculated and is known, please provide this value:

Total Dynamic Head (TDH):

TDH includes friction losses, static head, and any other head required. The TDH value has the biggest influence on equipment selection. If this is overestimated then it will result in an overpriced and oversized unit.

Unit

meters

feet

If it is underestimated then pumping conditions will not be met. It is very important to provide accurate data.

PIPING DETAILS

If Total Dynamic Heal is not known but other values like Static Head (Hs), Discharge Length (L), Number of Bends, and type/quantity of accessories: * In this case TOYO can make piping recommendations for basic systems. Final piping design is the responsibility of the customer.

Static Head (Hs)

Unit

meters

feet

Discharge Length (L)

Unit

meters

feet

Inner Pipe Diameter (D):

Unit

Number of Bends in Discharge

* Leave blank any details that do not apply

Number of Elbows (45o)

Number of Elbows (90o)

Number of Valves

Pipe Class and Type:

PUMP DETAILS

Pump Type

Submersible

Horizontal

Cantilever

Lineshaft

Voltage

Frequency

VFD?

Yes

Site Altitude

m.a.s.l.

Is this replacing an existing pump?

Yes

What make/model?

Reason for replacement?

Piping Arrangement for Submersible Dredging

Unit

Maximum Level

Unit

Minimum Level

Unit